SDX 19.1 Release Notes

Release 19.1.1

Bugs fixed:

  • Improved alignment of PPS and RF signals
  • Crash when passing an invalid instance-id
  • API robot was missing

Release 19.1.0

New Features:

  • Added editable grid for the SBAS message 18 mask
  • Added editable grid for the SBAS message 26 GIVEI
  • Added the possibility to add offsets to the ionospheric model
  • Added the possibility to use the ionospheric offset grid for the SBAS message 26
  • Added SBAS messages 18 (IGP mask) and 26 (IGP corrections)
  • Added possibility to change SV Antenna Patterns (gain and phase offset)
  • Increased GPS L5 power offset (1.5 dB up) and updated satellite gain pattern
  • Lowered SBAS L1 power offset (1 dB down)
  • Lowered Galileo E5a and E5b power offset (2 dB down)
  • Added the possibility to apply a health parameter to all satellites in a constellation
  • Uniformized health settings behaviour in all constellations for non-present PRNs
  • Added the possibility to choose the GPS Anti-Spoofing (AS) flag in the Health settings page.
  • Added new columns to the raw data logging:
    • Receiver antenna azimut
    • Receiver antenna elevation
    • Receiver arrier phase offset
    • SV antenna azimut
    • SV antenna elevation
    • SV carrier phase offset
  • Added almanac messages in GPS L2C and L5 signals
  • Updated Galileo default ephemeris file: SISA default value is no longer undefined or unknown.
  • Added support of the "GNSS SDR Metadata format": Generated IQ-Files will now use that format. Importing IQ-Files supports this new format, as well as the the previous custom SDX format.
  • Added the possibility to modify the serial port settings when connecting to a Receiver
  • Added the possibility to choose the rate at which the NMEA data is logged

Bugs Fixed:

  • Fixed elapsed time not updating when having an interference output in None mode.
  • Fixed Deviation tab's Display Settings not loading properly
  • When generating GNSS signal with "Gaussian Noise" to IQ-File, Gaussian Noise is effectively added to the signal in the IQ-File.

Remote API version 24:

  • Added Commands :
    • IsTrajectoryCompleted: Returns whether the route or track is completed.
    • GetConfigPaths: Returns a list of paths for all the files in the Configurations folder.
    • AddVehicleGainPatternOffset
    • GetVehicleGainPatternOffset
    • GetAllSVAntennaNames
    • AddSVGainPatternOffset
    • GetSVGainPatternOffset
    • [Set/Get]SVAntennaGain
    • [Set/Get]SVAntennaPhaseOffset
    • SetSVAntennaGainCSV
    • SetSVAntennaPhaseOffsetCSV
    • AddEmptySVAntennaModel
    • DeleteSVAntennaModel
    • RenameSVAntennaModel
    • CopySVAntennaModel
    • ImportSVAntennaModel
    • ExportSVAntennaModel
    • [Set/Get]SVAntennaModelToPrn
    • [Set/Get]SVAntennaModelForAllSat
    • [Set/Get]GpsSatelliteAntiSpoofingFlag: Set/Get the GPS anti-spoofing flag.
    • [Set/Get]LogNmeaRate: Rate at which the NMEA data is logged.
    • [Set/Get]IonoGridError: Error offset for a ionospheric grid point.
    • [Set/Get]IonoGridGIVEI: GIVEI for a ionospheric grid point.
    • [Set/Get]IonoGridMask: Flag for a ionospheric grid point in the SBAS message 18 mask.
    • [Set/Get]IonoGridErrorAll: All the error offsets in the ionospheric grid.
    • [Set/Get]IonoGridGIVEIAll: All the GIVEI in the ionospheric grid.
    • [Set/Get]IonoGridMaskAll: All the mask flags in the ionospheric grid for a given service provider.
    • [Set/Get]IonoGridErrorAll: All the error offsets in the ionospheric grid.
    • [Import/Export]IonoGridErrors: Import/Export ionospheric grid errors.
    • [Import/Export]IonoGridGIVEI: Import/Export ionospheric grid GIVEI.
    • [Import/Export]IonoGridMask: Import/Export ionospheric grid mask for a given service provider.
    • ApplyDelayInSbas: Set if the ionospheric error grid should be used for SBAS corrections in message 26.
    • IsDelayAppliedInSbas: Whether the ionospheric error grid is used in SBAS message 26.
    • EnableIonoOffset: Set if the ionospheric error grid should be applied to the ionosphere.
    • IsIonoOffsetEnabled: Whether the ionospheric error grid is applied to the ionosphere.
    • SetSbasHealthRanging: Apply ranging flag for a SBAS satellite.
    • SetSbasHealthCorrections: Apply correction flag for a SBAS satellite.
    • SetSbasHealthIntegrity: Apply integrity flag for a SBAS satellite.
    • SetSbasHealthReserved: Apply reserved flag for a SBAS satellite.
    • SetSbasHealthService: Apply service provider for a satellite.
  • Modified commands:
    • [Set/Get]VehicleAntennaPhaseOffset: gain argument has been renamed in phaseOffset.
    • SetSbasEphemerisParams: we can now change health parameters during simulation.
  • Modified behaviour :
    • WaitSimulatorState no longer blocks other commands to be executed.
  • Removed commands:
    • SetEnabledSbasMessages: Replaced by EnableSbasMessages.
    • SetGpsTime: Replaced by SetGpsStartTime.
    • SetSatPower: Replaced by SetSatellitePower.
    • SetSbasMonitoredConstellations: Replaced by SetSbasMonitoredSystems
    • SetChirpToIntTx: Replaced by SetIntTxChirp.
    • SetCWToIntTx: Replaced by SetIntTxCW.
    • SetPulseToIntTx: Replaced by SetIntTxPulse.
    • SetBPSKToIntTx: Replaced by SetIntTxBPSK.
    • SetBocToIntTx: Replaced by SetIntTxBOC.
    • SetAWGNToIntTx: Replaced by SetIntTxAWGN.
    • SetPowerGpsCaOffset: Replaced by SetPowerOffset.
    • SetPowerGpsL2COffset: Replaced by SetPowerOffset.
    • SetPowerGpsPcodeL1Offset: Replaced by SetPowerOffset.
    • SetPowerGpsPcodeL2Offset: Replaced by SetPowerOffset.
    • SetPowerGpsMcodeL1Offset: Replaced by SetPowerOffset.
    • SetPowerGpsMcodeL2Offset: Replaced by SetPowerOffset.
    • SetPowerGpsL5Offset: Replaced by SetPowerOffset.
    • SetPowerGlonassG1Offset: Replaced by SetPowerOffset.
    • SetPowerGlonassG2Offset: Replaced by SetPowerOffset.
    • SetPowerGalileoE1Offset: Replaced by SetPowerOffset.
    • SetPowerGalileoE5aOffset: Replaced by SetPowerOffset.
    • SetPowerGalileoE5bOffset: Replaced by SetPowerOffset.
    • SetPowerBeiDouB1Offset: Replaced by SetPowerOffset.
    • SetPowerBeiDouB2Offset: Replaced by SetPowerOffset.
    • SetPowerWaasOffset: Replaced by SetPowerSbasOffset.
    • SetPowerEgnosOffset: Replaced by SetPowerSbasOffset.
    • SetPowerMsasOffset: Replaced by SetPowerSbasOffset.
    • ImportRinex: Replaced by ImportConstellationParameters.

If you need access to the clients' site to download the binaries for this release, please contact us.

Scripts -->